Tools

Flexible rubber hose extension with steel casing and two 12V1 connectors - for hard to reach valves of earthmoving machinery. Flexibility: 95%Valve extension insert: sealingPressure range: up to 20 barPressure resistance/burst pressure: 120 barProfessional assembly: with tightening clampBreakage resistance: very high Vehicle typeconstruction vehicleLength of valve stem in mm295 mm

With our universal weight tongues you can easily mount or dismount balancing weights on steel and aluminium rims. At the same time, a plastic cap is attached to these tongues, which protects the coating of the balancing weights.Our tyre fitting tools make it easier to fit and remove balancing weights and tyre valves for tyre changes. They ensure, among other things, that the tyre and rim can be separated manually without auxiliary power, that you can properly hammer in weights on motorcycle spoked wheels or that you can easily mount and dismount spoke weights.In addition to our tools for tyre changes, there are several other products that are indispensable for a high-quality wheel change. These include, for example, adhesive weights / impact weights, tyre irons, tyre valves / rim valves and TPMS sensors. You will find all products from this area in the usual high quality in our range of products. Colourblue

The lever plug nipple is suitable for different tyre inflation fittings. Mounting on the hose end piece. Our tyre fillers and tyre inflation accessories convince with a modern and attractive appearance and simplify the inflation of the tyre many times over. The tyre fillers are calibrated and have a clear and simple pressure gauge. This results in easy handling and safe inflation of the summer tyre or winter tyre. Due to the high manufacturing quality of the tyre testers, a long service life is guaranteed even with daily use. Such a tyre pressure gauge is of course also suitable for tyre changes of a private nature, as it simply makes work more pleasant. In addition to the tyre fillers, you can also obtain a tyre filler replacement inner tube from us to complete your range.In addition to the various tyre fillers in our range, there are several other products that are essential for a high-quality tyre change. These include, for example, adhesive weights / impact weights, tyre irons, tyre valves / rim valves and TPMS sensors. You will find all products from this area in the usual high quality in our range of products. Degree of assemblyassembledVehicle typepassenger car

Valve connector nipple without clip for fixing the hose on the valve. Suitable for cars and lorries. The nickel-plated brass plug features a self-closing "closed end" function after removing the tyre valve, so that no more air can escape. The closed mechanism is used for the direct air supply from a main line (e.g. compressor). When plugged into the valve, the plug is opened, so that the air can flow into the tyre. When removing the tyre valve, the plug closes again. Valve connector nipples are ideal for replacing the seal.Connection diameter: 6 mmInner diameter hose: 5 mm Vehicle typepassenger car, truckCoatingnickelMaterialbrassVariant valve endclosed-end

EM thumb-lock air chuck made of nickel-plated brass for easy inflation of earthmoving machinery tyres (12V1) at 90° to the hose. By flipping the eccentric lever, the seal is pressed firmly onto the valve and thus ensures an optimal hold of the plug. The ""open end” plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application. Thumb-lock air chucks are ideal for replacing the seal.Connection diameter: 7 mmInner diameter hose: 6 mm Vehicle typeconstruction vehicleCoatingnickelMaterialbrass

The rotating tyre filler with Swiss quick coupling for car and bicycle valves offers maximum flexibility in all areas:The valve can be filled in any position due to the rotating connection head.Quick tool change due to hose with quick coupling.Impact-resistant & robust plastic housingPressure gauge can be read at any valve position.The ""open end” plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application. Vehicle typebicycle

The small ALLIGATOR TPMS starter set offers everything you need to get started with TPMS service. The following components are included in the Mini-Starter-Kit PT1:1x ALLIGATOR programming unit PT1 (9-590922)4x universal sensor RS3 (9-590914)4x aluminium valve silver anodised (9-590906)1x operating instructions Vehicle typepassenger car

Valve connector nipple with inner thread connection and spring-loaded clip for fixing the valve at an 25° angle - for easy inflation of car and lorry tyres. The nickel-plated brass plug features a self-closing "closed end" function after removing the tyre valve, so that no more air can escape. The closed mechanism is used for the direct air supply from a main line (e.g. compressor). When plugged into the valve, the plug is opened, so that the air can flow into the tyre. When removing the tyre valve, the plug closes again. Valve connector nipples are ideal for replacing the seal.Inner thread: 1/4-18NPT Vehicle typepassenger car, truckCoatingnickelMaterialbrassVariant valve endclosed-end

12 m tyre inflation hose with momentum plug nipple and tyre inflation connection (wing nut M16x1.5).

The PT1 starter kit offers the perfect introduction to TPMS service. The set includes the following components:1x ALLIGATOR programming unit PT1 (9-590922)8x universal sensor RS3 (9-590914)8x aluminium valve silver anodised (9-590906)1x operating instructions Vehicle typepassenger car

Straight universal hold-on connector for connecting a hose. The combined version for car, lorry and bicycle valves (flash/dunlop valve) has a nickel-plated brass plug with a ""closed end"" function. The plug is self-closing after removing the tyre valve, so that no more air can escape. The closed mechanism is used for the direct air supply from a main line (e.g. compressor). When plugged into the valve, the plug is opened, so that the air can flow into the tyre. When removing the tyre valve, the plug closes again. Length: 260 mmOuter diameter: 8 mmInner diameter hose: 7 mm Vehicle typebicycleCoatingnickelMaterialbrassLength of valve stem in mm260 mmVariant valve endclosed-end

The bicycle valve nipple 8/7 made of nickel-plated brass is a hose attachment that allows easy filling of flash valves (Dunlop). The plug features a self-closing ""closed end"" function after removing the tyre valve, so that no more air can escape. The closed mechanism is used for the direct air supply from a main line (e.g. compressor). When plugged into the valve, the plug is opened, so that the air can flow into the tyre. When removing the tyre valve, the plug closes again.Connection diameter: 8 mmConnection diameter: 8 mmInner diameter hose: 7 mm Vehicle typebicycleCoatingnickelMaterialbrassVariant valve endclosed-end

Hold-on connector without handle for inner thread R1/4. The "open end” nickel-plated brass plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application. Suitable for cars and lorries. Vehicle typepassenger car, truckCoatingnickelMaterialbrassLength of valve stem in mm170 mmVariant valve endopen-end

The water filling fitting made of nickel-plated brass is used as a fitting for connection to air/water valves. Vehicle typetractorCoatingnickelMaterialbrassLength of valve stem in mm33,5 mm

Wing nut M16x1.5 made of nickel-plated brass. Due to the lateral wings on the nut, the wing nuts can be easily tightened or loosened by hand. Ideal for screw connections that need to be loosened frequently, but still need to be robust.Length: 43 mmOuter diameter: 9 mmInner diameter hose: 8 mm CoatingnickelMaterialbrassLength of valve stem in mm42,5 mm